First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

Heterointerface Engineering of ZnO/CdS Heterostructures through ZnS Layers for Photocatalytic Water Splitting

Solar-driven water splitting to produce clean and renewable hydrogen offers a green strategy to address the energy crisis and environmental pollution. Heterostructure catalysts are receiving increasing attention for photocatalytic hydrogen generation. ZnO/ZnS/CdS and ZnO/CdS heterostructures have been successfully designed and prepared according to two different strategies. By introducing a heterointerface layer of ZnS between ZnO and CdS, a Z scheme charge-transfer channel was promoted and achieved superior photocatalytic performance. A highest hydrogen generation rate of 156.7 μmol g⁻¹ h⁻¹ was achieved by precise control of the thickness of the heterointerface layer and of the CdS shell. These findings demonstrated that heterostructures are promising catalysts for solar-driven water splitting, and that heterointerface engineering is an effective way to improve the photocatalytic properties of heterostructures.     

INFLUENCE OF SHAMPOO ON THE MECHANICAL PROPERTIES OF HUMAN HAIRS1)

头发的弹性和抵抗意外拉断的能力是人们非常关注的指标。为了迎合这一需求,有些厂商推出了具有所谓“强韧”发质功效的洗发水,但其实并不清楚是否真能使头发变“强韧”。为此,针对市场上常见的一种标称具有“强韧”功效的洗发水,通过拉伸力学实验对头发洗护前后的力学性能进行了对比研究。结果表明,用洗发水处理后的头发,屈服应力下降,意味着头发更容易过早进入塑性变形;抗拉强度、最大应变减小,意味着头发抵抗外力拉断的能力下降;杨氏模量下降,说明头发抵抗弹性变形的能力变差。综上,所研究的洗发水对“强韧”发质没有帮助。 关键词: 头发,洗发水,力学性能,强度,韧性     

考虑塑性变形发展程度系数的RC梁开裂弯矩改进计算公式

针对RC梁开裂荷载计算方法尚未统一的现状，首先，结合18根RC梁试验数据对比了已有的6种RC梁开裂弯矩计算公式，发现开裂弯矩理论计算值与试验值的偏差大小和混凝土强度有关；然后，通过提出塑性变形发展程度系数k，推导新的RC梁开裂弯矩计算公式，并进一步基于k值和塑性影响系数计算值γ_k进行改进；最后，选取12根RC试验梁验证改进公式的准确性，证明改进公式的计算值与试验值吻合更好且偏于安全。     

Screening potential antagonists of epidermal growth factor receptor from Marsdenia tenacissima via cell membrane chromatography model assisted by HPLC–ESI–IT–TOF–MS

Marsdenia tenacissima, or Tongguanteng in Chinese, is a traditional Chinese herb and has a broad application in clinical practice for its pharmacological effects of treating asthma, pneumonia, tonsillitis, pharyngitis tumors, etc. However, few studies have reported the screening of the active components of this medicine for tumor therapy. In this work, a two‐dimensional analytical system was developed to screen antagonists of epidermal growth factor receptor (EGFR) from M. tenacissima. A fraction was retained on the EGFR cell membrane chromatography (CMC) column, separated and identified as tenacissoside G (TG), tenacissoside H (TH) and tenacissoside I (TI) by two‐dimensional HPLC–IT–TOF–MS. Molecular docking and 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide (MTT) assay were carried out to assess the activity of TS (including TG, TH and TI). Molecular docking results showed that the binding mode of TS on EGFR is similar to that of gefitinib. The MTT assay demonstrated that gefitinib and TS (especially TI) could inhibit the growth of EGFR highly expressed cell lines in a dose‐dependent manner in the range of 5–50 μmol/L. In conclusion, the two‐dimensional EGFR/CMC–HPLC–IT–TOF–MS system could be a useful approach in drug discovery from traditional Chinese medicines for searching for potential antitumor candidates.     

Experimental probes of silver metal nanoparticle formation kinetics: Comparing indirect versus more direct methods

The kinetics of noble metal nanoparticle formation in bottom-up syntheses are important for controlling and optimizing these methods. Hence, experimental probes that are easily accessible to most laboratories are also of interest. We collected kinetic curves for the formation of silver nanoparticles in a modified Turkevich method with citrate acting as the reducing and stabilizing agent by (i) measuring the change in silver nanoparticle surface plasmon resonance by UV-visible spectroscopy, a somewhat indirect method, and then also by (ii) measuring the change in silver ion concentration by ion-selective electrode potentiometry and/or atomic absorption spectroscopy, two more direct methods. The resulting sigmoidal kinetic curves were curvefitted with the Finke-Watzky two-step kinetic model of slow, continuous nucleation and fast autocatalytic growth to extract average rate constants. We found that the kinetic curves obtained by following the change in silver ion concentration were apparent mirror images of those constructed by following the change in nanoparticle surface plasmon resonance, and that their respective curvefits displayed the same sigmoidal characteristics. The resultant values of the rate constants for nucleation and growth overlapped within experimental error between the methods and showed similar trends over the range of citrate concentrations studied. The use of multiple probes in this work to follow the kinetics of nanoparticle formation helps fill a need for the comparison and evaluation of different methods available to scientists, particularly those considered easily accessible.     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Existence of nontrivial solutions for fractional Schrödinger equations with critical or supercritical growth

In this paper, we study the following fractional Schrödinger equation with critical or supercritical growth where 0 < s < 1, N > 2s, λ > 0, , , ( ? Δ)^s denotes the fractional Laplacian of order s and f is a continuous superlinear but subcritical function. Under some suitable conditions, we prove that the equation has a nontrivial solution for small λ > 0 by variational methods. Our main contribution is related to the fact that we are able to deal with the case .     

Singular Hamiltonian elliptic systems with critical exponential growth in dimension two

We will focus on the existence of nontrivial solutions to the following Hamiltonian elliptic system where are numbers belonging to the interval [0, 2), V is a continuous potential bounded below on by a positive constant and the functions f and g possess exponential growth range established by Trudinger–Moser inequalities in Lorentz–Sobolev spaces. The proof involves linking theorem and a finite‐dimensional approximation.